All data is for information only------(<---links)
	PRODUCT DATA of Ti 13V 11Cr 3Al

Material	Ti 13V 11Cr 3Al
General Information	Ti-13V-11Cr-3Al is a heat-treatable alloy possessing good workability and toughness in the annealed condition and high strength in the heat-treated condition. It is noted for its exceptional ability to harden in heavy sections mmpds
Chemical Composition	Ti-13V-11Cr-3Al

	EXPERIENCE IN PRACTICE

Equivalent Designations

Ti-13-11-3, UNS R58010

	PHYSICAL PROPERTIES

Specific Gravity

4.82

	THERMAL PROPERTIES

Thermal Expansion Coefficient

9.67 μstrain/°C Data Quality: Manufacturer's data

	RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY

Stress Corrosion Status	High Resistance to SCC: Table 1 Data Quality: Design Data
EMF vs SCE	-0.23
Bimetallic Corrosion	Can be connected without any restriction to: Cr, Cu, Brass, Cu-Ni alloys, Al-bronzes, Si-bronzes, Gun metal, P-bronzes, Sn-bronzes, Ag, 300 and 400 series stainless steel, low alloy steel, Au, Pt, C, Rh Can be connected in a non-controlled environment to the above and Ni, Monel, Inconel, Ni-Mo alloys Can be connected in a clean room environment to above and Cd, Al-Cu alloys Needs specific measures: All others Test:ECSS-Q-ST-70C Rev.1 Table 5.1 Data Quality: Design Data
Welding	Nitrogen, hydrogen, carbon dioxide, and mixtures containing these gases shall not be used Welding with alloy-matching fillers is recommended, preferably using extra Low Interstitial (ELI) filler wires

	SPECIAL RECOMMENDATIONS

Lessons Learned

A great deal of care needs to be exercised to ensure complete inert gas (argon or helium) coverage during welding.